High moisture in the slab and associated moisture vapor transmission is one of the leading causes of resinous flooring issues and failures. LATICRETE® recommends for protection against moisture vapor or when the relative humidity (RH) in the concrete measures 75% or greater to use VAPOR BAN™ ER or SPARTACOTE® Moisture Vapor Barrier as your base coat (primer) in all SPARTACOTE systems.
Save a step in your installation process by pigmenting using SPARTACOTE Epoxy Pigments and broadcast directly into the wet resin.
Estimate your project today with the LATICRETE Project Estimator
Compare Moisture Mitigation Systems
Surface Preparation: Mechanically profile to CSP-3
Number of Coats: 1
Overall Thickness (DFT):
16 mils (for all systems)
Features
- Re-coat in as little as 3-4 hours
- Pigmentable with SPARTACOTE Epoxy Pigments
- Accepts Broadcasts of SPARTACOTE Blended Chip (Flake) or Quartz
- Exceeds ASTM F3010 (<0.1 perms at 16 mils)
Surface Preparation: Mechanically profile to CSP-3
Number of Coats: 1
Overall Thickness (DTF):
12 mils for GUARD or METALLIC systems; 16 mils for CHIP or QUARTZ systems
Features
- Re-coat in 12-72 hours
- Pigmentable with SPARTACOTE Epoxy Pigments
- Accepts Broadcasts of SPARTACOTE Blended Chip (Flake) or Quartz
- Exceeds ASTM F3010 ( <0.1 perms at 16 mils)
Industries